P/N PL-HLINK8IN
8" Hyperlink
An 8" rigid coupler extension, that can be mounted to (5) Bases and/or Knuckles.
P/N PL-SPOSTEXT7IN-BK
Standard Post - 7 Inch - Bracket Adaptable End
A rigid (non-telescopic) mount post with an adapter on one end to mount most products in The Bracket Series.
P/N PL-HLINK6IN
6" Hyperlink
A 6" rigid coupler extension, that can be mounted to (4) Bases and/or Knuckles.
The "original" PL Series provides extremely versatile, low-cost, effective solutions for mounting switches, sensors, vision cameras, lighting sources and virtually any peripheral devices that need to be frequently re-positioned, or exact position is not known at set up. All products in The PL Series are made from anodized 6061 aluminum with stainless steel fasteners. The PL Series is compatible with most products in The Bracket Series.
Select from individual parts in The PL Series to build your own mounting system, or choose a Kit which is an easy way to order the most commonly used, basic mounting systems. Click here to visit The PL Series Kits.
P/N PL-HLINK14IN
14" Hyperlink
A 14" rigid coupler extension, that can be mounted to (8) Bases and/or Knuckles.
P/N PL-TPOST2IN-BL
2" Telescopic Post - Ball End
Telescoping post that may be positioned within a 2" range of travel, with a ball end.
P/N PL-TPOST6IN-BK
6" Telescopic Post - Bracket Adaptable End
Telescoping post that may be positioned within a 6" range of travel, with an adapter on one end to mount most products in The Bracket Series.
P/N PL-TPOST6IN-THD
6" Telescopic Post - Threaded End
Telescoping post that may be positioned within a 6" range of travel, with a 1/4-20 female thread and M10x1.5 male threaded end.
The Accessories
P/N PL-HLINK12IN
12" Hyperlink
A 12" rigid coupler extension, that can be mounted to (7) Bases and/or Knuckles.
P/N PL-HLINK10IN
10" Hyperlink
A 10" rigid coupler extension, that can be mounted to (6) Bases and/or Knuckles.
P/N PL-TPOST2IN-THD
2" Telescopic Post - Threaded End
Telescoping post that may be positioned within a 2" range of travel, with a 1/4-20 female thread and M10x1.5 male threaded end.
P/N PL-TPOST6IN-BL
6" Telescopic Post - Ball End
Telescoping post that may be positioned within a 6" range of travel, with a ball end.
The hyperlinks
P/N PL-SPOSTEXT5IN-THD
Standard Post - 5 Inch - Threaded End
A rigid (non-telescopic) mount post with a 1/4-20 female thread and M10x1.5 male threaded end.
The posts
P/N PL-BALLBASE
Ball Base
The ball end of the PL-BALLBASE allows direct mounting to a PL-KNK or a PL-BASE. The flat side allows mounting to your products, such as HMIs or panels.
P/N PL-SPOST-THD
Standard Post - Threaded End
A rigid (non-telescopic) mount post with a 1/4-20 female thread and M10x1.5 male threaded end.
The Essentials
P/N PL-90BALLADPT
90 Degree Ball Adapter
For branching out to a second location, while maintaining one Base.
The Adapters
P/N PL-BPOST-BK
Bent Post - Bracket Adaptable End
A rigid (non-telescopic) mount post with fixed increased articulation. An adapter on one end to mount most products in The Bracket Series.
P/N PL-HDPL-VB1
Vacuum Base
A built-in hand pump produces vacuum for holding with a rating of 70 pounds of holding force when mounted in a vertical position with the load in a down position. Recommended for temporary application. Requires smooth mounting surface. Testing for “time to hold” is recommended prior to actual use. Compatible with PL-BASE and HDPL-BASE. Ships with stainless steel mounting hardware for both bases (bases not included).
P/N PL-SPOSTEXT5IN-BK
Standard Post - 5 Inch - Bracket Adaptable End
A rigid (non-telescopic) mount post with an adapter on one end to mount most products in The Bracket Series.
P/N PL-TPOST2IN-BK
2" Telescopic Post - Bracket Adaptable End
Telescoping post that may be positioned within a 2" range of travel, with an adapter on one end to mount most products in The Bracket Series.
P/N PL-HLINK4IN
4" Hyperlink
A 4" rigid coupler extension, that can be mounted to (3) Bases and/or Knuckles.
P/N PL-KNK
Knuckle
Adaptable to the ball ends of all Posts and Hyperlinks to achieve maximum articulation. A strategic player in the Pop-Link™ system.
P/N PL-KPOST-BK
Keifer Post - Bracket Adaptable End
A rigid (non-telescopic) mount post with variable enhanced articulation. An adapter on one end to mount most products in The Bracket Series.
P/N PL-PBALL
Power Ball
May be attached to any Threaded Post for adaptation to another Base or Knuckle.
P/N PL-BKADPT
Bracket Adapter
May be used to mount any bracket in The Bracket Series to an M10X1.5 male thread, or Threaded Post.
P/N PL-BASE
Base
The foundation of the Pop-Link™ System. It all starts here! Easily mounts to most aluminum extrusion.
P/N PL-SPOST-BK
Standard Post - Bracket Adaptable End
A rigid (non-telescopic) mount post with an adapter on one end to mount most products in The Bracket Series.
Mounting
Made
Easy!
P/N PL-EXTADPT
Extrusion Adapter
Mount Bases to most common aluminum extrusion sizes. Female threaded end attaches to English or metric threaded rod which may then be attached to standard aluminum extrusion.
The PL Series
P/N PL-HDPL-MAG1
Magnetic Base
A magnetic base to which a base from the The PL Series (PL-BASE) or The HDPL Series (HDPL-BASE) can be mounted. Ships with mounting hardware for both bases (bases not included).
P/N PL-CS
Clamshell
The clamshell directly mounts to the PL-KNK or PL-BASE. It has a .501"Ø through hole that acts as a sleeve to clamp down onto your specific application.
Pop-Link Mounting Systems
P/N PL-FK14-20
1/4-20 Fastener Kit
Fastens to the end of any PL Series Post with a threaded end (-THD) resulting in a 1/4-20 male thread. Includes: (1) 1/4-20 X 1.00 SS Socket Set Screw an (1) 1/4-20 SS Jam Nut. Installation with thread locking compound recommended. Replaces P/N PL-14-20THDADPT Thread Adapter.
P/N PL-HDPL-DSTAND1
Demo Stand
A stainless steel stand to which you can mount a base from The PL Series (PL-BASE) and The HDPL Series (HDPL-BASE). Ships with mounting hardware for both bases (bases not included).
P/N PL-HLINK2IN
2" Hyperlink
A 2" rigid coupler extension, that can be mounted to (2) Bases and/or Knuckles.
P/N PL-SPOSTEXT7IN-THD
Standard Post - 7 Inch - Threaded End
A rigid (non-telescopic) mount post with a 1/4-20 female thread and M10x1.5 male threaded end.